AT21CSMK100 Atmel Single-Wire Serial EEPROM USB Evaluation Kit User Guide
Atmel-
Atmel-
8993-SEEPROM-AT21CSMK100-UserGuide
10
3.4.2 Frequency Slider (kbps)
The Frequency Slider provides the ability to change the I/O speed between the microcontroller and the DUT. The
AT21CS01 and AT21CS11 power-on default frequency setting is High Speed Mode.
3.4.3 Energy Consumed Gauge Meter
Displays DUT current consumption. The Energy Meter is updated when a write or read of the DUT is performed.
After the read or write is completed, the standby current is measured and the Energy Meter is updated accordingly.
3.5 DEVICE STATUS
Figure 11. Device Status Pane
The Device status shows various device features including, Serial Number, the DUT Slave Address, the
Manufacturer ID Register, and the Lock State for the various memory Zones (Zone 0 – Zone 3).
3.5.1 Serial Number
Displays the Serial Number read from the DUT
3.5.2 Slave Address
Preprogrammed device Slave Address of the DUT
3.5.3 MFG ID Register
Reports the content of the DUT Manufacturer ID Register
3.5.4
Security Register User Space
Reports the Lock State of the User Space of the Security Register
3.5.5 Zone Lock State
Reports the Lock State for the respective memory Zones (Zone 0 – Zone 3)
