AT02876: Atmel REB212BSMA Hardware User Manual [APPLICATION NOTE]
Atmel-42097B-WIRELESS-AT02876-REB212BSMA-Hardware-User-Manual_ApplicationNote_062014
19
these specifications are exceeded in the final product, a submission must be made to a notified body for
compliance testing to all required standards. The “CE“ marking must be affixed to a visible location on the OEM
product. The CE mark shall consist of the initials "CE" taking the following form:
•
If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be
respected
•
The CE marking must have a height of at least 5mm except where this is not possible on account of the
nature of the apparatus
•
The CE marking must be affixed visibly, legibly, and indelibly
More detailed information about CE marking requirements you can find at "DIRECTIVE 1999/5/EC OF THE
EUROPEAN PARLIAMENT AND OF THE COUNCIL" on 9 March 1999 at section 12.
