6.4.7.4.3.2. Updating Username and Password Configuration
After entering the changes, press the "Update" button to update the configuration.
Just updating the configuration does not save the changes. In order to save the
changes so that they remain in effect after the next boot, the configuration must be
saved to flash memory. Refer to Section 6.4.7.4.5, “AT Admin: System - Save &
Load” for information on saving.
6.4.7.4.4. AT Admin: System - Firmware
The userland (applications) and Linux kernel firmware can be updated on the Firmware screen.
Figure 6.19. AT Admin: System - Firmware
To update to the image files available from the official web site
[2]
, first press the "Get firmware options" button. The
available image files will be displayed in the "Applications (Userland)" and "Kernel" boxes.
[2]
A connection to the internet is required for this function.
Armadillo-440 LCD Model Development Set Startup Guide
Network
43
