manualshive.com logo in svg

Atlona OmniStream AT-OMNI-512, Manual

Share
Download
Atlona OmniStream AT-OMNI-512 Manual Download Page 29

AT-OMNI-512

29

AES67 Audio

AES67 audio is a standard for high-performance audio streaming over IP, providing several features such as 

synchronization, media clock identification, and connection management.  AES67 does not support compressed 

audio formats, such as Dolby® Digital, and others.  Source audio must be transmitted as LPCM 2.0 or 5.1.

Basic Operation

1. 

Login to AMS.  Refer to 

Accessing Encoders in AMS (page 16)

, if necessary.

2. 

The AMS Dashboard will be displayed.

3. 

Click the        icon, in the upper-left corner of the AMS Dashboard.

4.  Click 

Devices

 > 

All

 and select the desired encoder from the 

Device List

.

5.  Click 

SESSION

 in the menu bar.

6. 

Scroll down to the 

Audio

 section and click the 

Enable AES67

 toggle switch to enable or disable this feature.  

When enabled, the toggle switch will be green.

Enable AES67 toggle switch (Session 1)

Summary of Contents for OmniStream AT-OMNI-512




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands