background image

2

www.atlona.com

Toll free: 1-877-536-3976  

Local: 1-408-962-0515

The Atlona AT-VGA10SS is 1 x 10 VGA with Audio Distribution Amplifier designed to accept a video and au-
dio feed from VGA source such as computer, media player or digital signage player and distribute the same 
feed to 10+ locations. The VGA10SS is featured with 1 x VGA/Audio input and 10 x CAT5/6/7 outputs which 
could be connected with Atlona AT-VGA300RL receiving modules up to 1000ft away.
The VGA10SS is also featured with local VGA and audio outputs, meant to either connect to a local display 
for monitoring or daisy chaining to another VGA10SS amplifier.

 
Note:

 Receiving models AT-VGA300RL are a required accessory

• 1 x AT-VGA10SS (transmitter module)
• 1 x 5v Power supplies (Universal 110/240V)
• 1 x Set of Wall Mounting Ears
• 1 x Instructions manual

1. 

Connect the VGA Source e.g., Computer, Video Codec, switch to the AT-VGA10SS (transmitting unit)

2. 

Connect the VGA Display e.g., Projector, LCD/LED or a switch to (receiving unit) – (receiving unit is sold 
separately)

3.  Terminate the CAT5, 6 or 7 wire with 568B termination and use a tester to make sure all pins are wired 

correctly before connect it to the VGA10SS transmitter.

4.  Connect the power supplies to both transmitter and receiver and the video and in a few seconds the 

video should appear on the display.

• 

Transmits VGA with Stereo Audio up to 1000ft away to 10+ locations

• 

Supports Full HD Video with resolutions up to 1920x1200

• 

Supports high resolution Video VESA: 640x480, 800x600, 1024x768, 1280x800, 1280x768, 1280x1024, 
1680x1050, 1600x1200, 1920x1080, 1920x1200

• 

Compatible with receiving modules: 

a. AT-VGA300RL (VGA + Stereo Audio up to 1000ft)

•  DDC adjustments (Internal and Extender modes can be used)
• 

Supports all VESA formats which is perfect when used with specialized projectors or commercial LCD 
panels.

• 

Local VGA/Audio output for local monitoring display or daisy chaining ability to go to another VGA10SS

•  Rack Mountable – 1U

INTRODUCTION

PACKAGE CONTENTS

CONNECTION AND OPERATION

FEATURES

Summary of Contents for AT-VGA10SS










Reviews: