4
SPECIFICATIONS:
AT-WPVGA-S
AT-WPVGA-R
AT-VGA100-S
AT-VGA100-R
Inputs
1 x VGA
1 x RJ45
1 x VGA
1 x RJ45
Outputs
1 x RJ45
1 x VGA
1 x RJ45
1 x VGA
VGA Type
(HD15) female
VGA Resolution
800x600, 1024x768, 1280x768 and 1280x1024
Signal Bandwidth
300 kHz max.
Signal Loss
Less than 3dB per pair
Transmitting Distance
up to 330ft (100m)
Dimensions (inch)
2.75x2.40x4.52
– Single Gang
2.75x2.40x4.52
– Single Gang
4.3x3.03x1.02
4.3x3.03x1.02
Weight (lb)
0.15
Operation Temperature
0 to 55
o
C
Storage Temperature
-20 to 85
o
C
Humidity
up to 95%
CONNECTION AND OPERATION
• Connect transmitter module to the VGA connection of a computer
• Connect display to the receiver module
• Install or use pre-existing CAT5, 6 or 7 cables
• Make sure to use a cable tester to check all wires are correctly terminated. (Incorrect Termination
may cause damage to the receiving module)
• Once connected, please refer to the Mode and Dip switch configuration
Max. Distance via CAT5 Cable:
• 640x480 pixels (15MHz) – 430ft
• 800x600 pixels (30MHz) – 320ft
• 1024x768 pixels (60MHz) – 250ft
• 1280x1024 pixels (100MHz) – 200ft
ANY TRANSMITTER
IS COMPATIBLE WITH
ANY RECEIVER
Transmitter:
Receiver:
