6
Method A: IR remote control
AUTO DETECT
function is used for checking input signal existed or not. Enable this function will
make the output port switching to the next available input in sequential order when the currently
selected input signal is lost. Disable this function will make the AT-PC81A stay at the the currently
selected input even if the input signal is lost.
Key
Code
Function
0x03
Turn on/off AT-PC-81A
0x02
Switch from the selected input to the next input channel
0x01
Switch from the selected input back to the prior input channel
0x04
Select
INPUT 1
to be the input source
0x05
Select
INPUT 2
to be the input source
0x06
Select
INPUT 3
to be the input source
0x07
Select
INPUT 4
to be the input source
0x08
Select
INPUT 5
to be the input source
0x09
Select
INPUT 6
to be the input source
0x0a
Select
INPUT 7
to be the input source
0x1b
Select
INPUT 8
to be the input source
0x1f
Reserved
0x0c
Turn on/off
AUTO DETECT
which allows the input source
can be automatically changed once the selected input is
disconnected
0x0d Reserved
0x0e
Reserved
CHANNEL CONTROL