AT-OPUS-RX41
31
HDBaseT Testing
The web server of the AT-OPUS-RX41 provides a tool for testing the signal integrity of HDBaseT cables. This tool
is useful for troubleshooting and identifying defective or damaged category cables which are connected from the
HDBaseT transmitter and the HDBaseT port on the AT-OPUS-RX41.
1.
Login to the web server. Refer to
for more information, if necessary.
2. Click
HDBT
in the top menu bar.
3.
Make sure that a category cable (CAT-5e or better) is connected between the
INPUT 1
(HDBaseT) port and a
compatible transmitter.
4. Click the
Start
button to begin testing the selected channel.
•
If the HDBaseT link integrity is good, then all tests will display as “Pass”.
•
If any part of the HDBaseT cable fails, then a numerical value, in decibels, will be displayed next to the
associated pair, under the
Signal Quality
section. These values can be reported to Atlona Technical Support
Engineers to help resolve possible issues.
Appendix
