AT-HDVS-210H-TX-WP
33
The Web GUI
HDBT page
HDBaseT Zone
The AT-HDVS-210H-TX-WP has only a single HDBaseT output. Therefore, this drop-down list is disabled.
Start
Click the
Start
button to being the HDBaseT testing. During testing, the button text will change to “Stop”. Click the
Stop
button to halt the HDBaseT testing process.
TX Version
The version of the Valens chip on the transmitter.
RX Version
The version of the Valens chip on the receiver.
TMDS Clock
Displays the pixel clock speed. If no source is connected, then this field will display as “None”.
Cable length (Estimated)
This field indicates the approximate length of the Ethernet cable connected between the HDBaseT ports on the
transmitter and the receiver. If the cable length is less than 15 feet, then this value will be displayed as 0 (zero).
Video Quality (Video BER)
The Bit Error Rate (BER). This field displays either PASS or FAIL during a test.
Cable Quality Pair (A, B, C, D)
Each of these fields will display either PASS or FAIL during a test.
