13
&& !& !
Display Side
Method A: Push-in button for switching input channels
Press the
INPUT SELECT
push-in button to switch the input source on the respective output port
connected to the matrix receiver in sequential order. The selected input source will be displayed on the
LED of
INPUT CHANNEL
.
Method B1: IR remote control for switching input channels
Please press F1 to F6, Enter (
), and Exit (
) button to enter IR control mode and decide which input
channel to be selected by pressing F1 to F6, Enter (
), and Exit (
) button, and wait a few seconds
for the input channel LED display to show the number of selected input source channel. Or you can use
up (
S
) and down (
T
) button to enter IR control mode and select the input channel in ascending and
descending order respectively.
Note
F1
HDMI input source #1
F2
HDMI input source #2
F3
HDMI input source #3
F4
HDMI input source #4
F5
HDMI input source #5
F6
HDMI input source #6
Enter (
)
HDMI input source #7
Exit (
)
HDMI input source #8
Up (
S
)
Switch source in ascending order
Down (
T
)
Switch source in descending order
¨
¨
¨
¨
If AT-HD88M-R receives the IR command, the LED will flash. If not, try it again.
Method B2: IR remote control for controlling the HDMI sources
Users can use the corresponding IR remote to control respective Blu-ray Disc player or any HDMI
compliant devices including AT-HD88M-SR itself with IR control at any display site.
Summary of Contents for AT-HD88M-SR
Page 1: ... ...
