5
Assembly
Step 5.
Unfasten to storage straps
around the canopy as shown.
Step 6.
Open the umbrella. Pull out
the lever clamp to release the glide
handle as shown. Grasp and slide the
glide handle up along the umbrella pole.
Turn the crank handle in the open
direction. Open the canopy until the
lower center hub reaches the end of the
support pole where the canopy has the
proper tension. Push down the lever
clamp to lock the glide handle against
the umbrella pole. This determines the
tilt of the umbrella canopy.
Step 7.
If the canopy does not cover your
patio as expected (does not offer shade
to the area), you may need to adjust the
position of the canopy. Loosen the control
knobs and turn the umbrella pole around
its axis to adjust the canopy. Finally, make
sure to tighten the control knobs to
secure the umbrella.
If the crank becomes too hard to crank,
check to see if the rope has come off
the pulley. If you continue to turn the
crank, the rope could break.
Contact our
customer service toll free at
1-855-880-
7205
for further assistance.
Storage
Straps
