5
Assembly and Use (cont’d)
Step 1:
Place the Table Top (A) upside down on a soft, flat surface. Align the
table Leg (B) holes with the corresponding Table Top (A) holes. Place Washers
(E) over the Table Top (A) holes and insert the Bolts (D). Use the Hex Key (F) to
tighten the Bolts (A), being careful not to over tighten.
D
D
C
E
E
B
A
Table:
Step 2:
Align the Leg Brace (C) holes with the corresponding table Leg (B)
holes. Place the Washers (E) over the holes and insert the Bolts (D) to attach
frame to the table Legs (B). Use the Hex Key (F) to tighten the Bolts (D), being
careful not to over tighten.
Step 3:
Finally check
that all bolts are tightened.