– 4 –
SM82TEN
Owner’s Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Installation
Fixed Install
The SM82TEN loudspeaker includes a versatile yet simple U-bracket designed to provide easy vertical or horizontal installation on almost any surface.
The loudspeaker may be installed using screws or bolts placed through the “Keyhole” shaped holes in the mounting bracket. The center
5
/
8
" hole
allows wire to exit through the bracket when wall mounting, for a clean installation. The unused inserts on the rear of the SM82TEN are
1
/
4
"-20. These
openings can be used with forged eyebolt and approved safety cable (wire rope sling) where redundant support is required for seismic or safety
considerations. These parts are available through multiple sources:
• Eyebolt, Lifting With Shoulder, Steel, Plain Finish,
1
/
4
"-20 Thread Size, 1" Thread Length, 1" Shank Length,
17
/
32
" Shoulder Diameter,
5
/
32
" Shoulder Length,
3
/
4
" Eye Inside Diameter, 1
1
/
4
" Eye Outside Diameter, 2
3
/
8
" Overall Length, 500 lb. Working Load Limit
• Galvanized Steel Cable Spool,
1
/
8
"
• Sleeve N Thimble
™
Kit for
1
/
8
" Cable
• Swage It Tool for
1
/
16
",
3
/
32
", and
1
/
8
" Cable Size
• The mounting knobs included with the SM82TEN may be easily interchanged with standard,
1
/
4
"-20 vandal proof hardware
• TORX Drive Button Head
1
/
4
" Machine Screw, Tamperproof,
1
/
2
" Length
• One-Way Round Head
1
/
4
" Machine Screw, Tamperproof,
1
/
2
" Length
• Spanner Flat Head
1
/
4
" Machine Screw, Tamperproof,
1
/
2
" Length
• Terminal Weather Cover Conduit Connection for
1
/
2
" Length
Overhead Suspension
CAUTION:
Suspending any object is potentially dangerous and should be attempted only by individuals who have thorough knowledge of the
techniques and regulations of rigging objects overhead using ONLY hardware approved for this type of installation. AtlasIED strongly recommends
that SM82TEN loudspeakers only be suspended overhead when taking into account all current national, federal, state, and local regulations. It is the
responsibility of the installer to insure that the speaker is installed according to those regulations. If the SM82TEN loudspeaker is suspended, AtlasIED
strongly recommends that the system be inspected at least once a year. If any signs of weakness or damage is detected, remedial action should be
taken immediately.
ATTENTION:
La suspension de tout objet est potentiellement dangereuse et ne devrait être accomplie que par du personnel qualifié, compétent et au
fait des différentes loi et restrictions en matière de gréage et en n’utilisant que du matériel approuvé pour ce type d’installation. AtlasIED recommande
fortement que les haut-parleurs SM82TEN ne soit suspendus qu’en tenant compte de la règlementation locale, provinciale et nationale. Il incombe à
l’installateur de d’assurer que l’ouvrage effectuée rencontre les lois et règlementation en vigueur. Si le haut-parleur SM82TEN est suspendu, AtlasIED
recommande fortement que l’installation soit inspectée une fois par année. Si l’installation est endommagée, ou montre des signes de faiblesse, des
actions correctives doivent être entreprises immédiatement.
