AtlasIED FAP62TEN, Owner'S Manual, Page: 8 / 13

FAP62TEN
Owner’s Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
– 8 –
System
Type Full-Range, Indoor, High Performance Loudspeaker
Operation Mode Non-Powered Passive
Operating Range (-10dB) 48 Hz - 20kHz
Frequency Response (±5dB) 63Hz - 20kHz
Usable Low Frequency Limit (10dB Down Point) 48 Hz
Input Sensitivity at 1W / 4M EN54-24 74dB
Vertical Coverage 110°
Horizontal Coverage 110°
Max Input Ratings (8
Ω
) 50 W Continuous, 100 W Programme
20 Volts RMS, 28.28 Volts Momentary Peak
Transformer Taps - 70V 32W(125
Ω
), 16W(250
Ω
), 8W(500
Ω
), 4W(1000
Ω
), 2W(2000
Ω
) and Low Impedance(8
Ω
)
Transformer Taps - 100V 32W (250
Ω
), 16W (500
Ω
) RNP , 8W (1000
Ω
), 4W (2000
Ω
) and Low Impedance (8
Ω
)
Directivity Factor (Q) 2.5 @ 2kHz
Directivity Factor (DI) 3.98 @ 2kHz
Power Handling in 8
Ω
Switch Position 50 Watts
Max SPL at 4m EN54-24 (Passive 16W @ 100V) 90dB
Transducer Complement
LF Transducer Qty and Size 1 x 6” Woofer
LF Voice Coil Size 1”
HF Transducer Qty and Size 1” (25mm) Dome Tweeter
HF Voice Coil Size N/A
Nominal Impedance (System) 8
Ω
Minimum Impedance (System) 8
Ω
@ 260Hz
Crossover Frequency 4.7 kHz
Crossover Slope 6dB / Octave
Driver Protection (High and Low Frequency) N/A
Enclosure
Color White Finish (RAL9014)
Enclosure Material Steel (Plated)
Grille Material Aluminum (White)
Mount Material Steel Tile Bridge
Input Connection 4 Pole Phoenix Style Connector
Mounting/Riggin Provisions Included Tile Bridge
Ingress Protection EN54-24 IP21C (Type A)
Environmental Testing N/A
Logo 1 Side - Grill
Product Dimensions (HxWxD) 7.64” x 12.50” x 12.50” (194.1mm x 317.7mm x 317.7mm)
Shipping Dimensions (HxWxD) 28” x 15” x 20” (711.12mm x 381mm x 508mm)
Net Weight 9.31 lbs (4.22kg)
Shipping Weight 14.9 lbs (6.759kg)
Warranty Coverage
Warranty Period 5 Years
NOTES:
1.
Power: All power figures are calculated using the rated nominal impedance.
2. Frequency response and sensitivity are free field measurements
3. Recommended power amplification is 1.5x program power.
4. RNP - Rated Noise Power