REV. 03
14 / 22
6.3 WHEEL DATA ENTRY
Before balancing a wheel, wheel data must be entered into the processor.
6.3.1
WHEEL DATA
6.3.2
MANUAL ENTRY (ref. Fig. 13)
x
Measure the distance from the machine
(“0” on the gauge) to the inner side of the
rim as shown in the figure 11. Entry the
data manually.
x
Measure the width at the rim with the
supplied caliper as shown in the figure 12.
Entry the data manually.
x
Check the diameter indicated on the rim.
Entry the data manually.
A:
The distance, measured from the machine to
the inner side of the rim
Fig. 11
B:
The wheel width
D:
The wheel diameter
Fig. 12
Fig. 13
Summary of Contents for WB11
Page 1: ......
