AtlasSound.com
72
AtlasSound.com
Stations with Compression Driver and Call Switch
WPVT-S
/
WPVT-F Series
. Surface and flush-mounting outdoor intercom and paging loudspeaker assemblies provide
weatherproof and vandal-proof two-way communication with call-in capability for remote guard and security stations,
entry and exit gates, perimeter doors and parking garages.
Environment-resistant assemblies include die-cast water sealed
VT Series
8
Ω
compression driver loudspeaker
available with 15 or 2 watt transformer and pre-mounted call SPDT-type switch protected by a weatherproof rubber
boot.
WPVT-S
Series
are surface mounting assemblies size 4
1
⁄
4
" Square x 3
1
⁄
8
" Depth.
WPVT-F Series
are recess /
flush-mounting versions size 6" Square x 3
3
⁄
16
" Depth. Both model series are finished in neutral gray(N) epoxy and
install to a standard 4" E.O. Box (not included). A large selection of installation accessories are also available. See
Installation Accessories for Voice / Tone Loudspeakers in section 7, page 66.
Model
Power
Rating
Transformer
Frequency
Response
Sensitivity As
Microphone
WPVT-1SN
15 watts (8
Ω
)
—
600 Hz – 5.5 kHz
-26 dBm
WPVT-4SN
15 watts
25V
WPVT-6SN
2 watts
25V
WPVT-1FN
15 watts (8
Ω
)
—
WPVT-4FN
15 watts
25V
WPVT-6FN
2 watts
25V
Visikom Telephone Visitation System
PVP-24
/
PVP-6
. Modular telephone intercommunication system accommodates up to 24 independent telephone
conversations of two or more telephone stations each for use where physical separation between communicating
individuals is desired. Typical applications include customer telephones and visitation areas of detention, correctional
and penitentiary facilities. Unique filter circuitry employed assures privacy and isolation from crosstalk. Plug-in design
provides simple installation, servicing and expansion capability. System is comprised of
PVP-24
control unit,
PVP-6
plug-in interface module and standard telephone stations with two form "C" (DPDT) hook switches including Atlas
Sound
CE Series
. A Surface-mounting control unit includes integral power supply, four
3
⁄
4
" cable access holes and
ports for installation of up to four
PVP-6
modules. Each plug-in module will control up to six isolated telephone circuits
for a total system capacity of 24 circuits. Chassis and lift-off cover are constructed of 18-gauge CRS and finished in
textured black epoxy. Wiring requirements are two conductor, telephone type. For complete wiring and installation
information, see manual #245691 at AtlasSound.com.
Model
Description
Power Req.
Power Output
Capacity
Dimensions
PVP-24
Plug-in Interface Module
117VAC
8VAC @ 2 Amps
Four PVP-6
9
1
⁄
2
" x 13" x 4
1
⁄
2
"
(241 mm x 330 mm x 114 mm)
*System uses telephone station Model Series CE and DP-1. See "Telephone Intercom Stations and Accessories'' — this section.
Common Talk Telephone Intercom Applications
Atlas Sound offers a selection of telephone stations and related accessories which can be used to create a variety of
common talk telephone intercom systems. For details on individual models, see sheet SL8-1434, "Telephone Intercom
Accessories" at AtlasSound.com.
Vandal-Proof Intercom Stations
Visikom Intercommunication System
PVP-24 with (4) PVP-6 Installed
(cover removed)
WPVT-F
Series
WPVT-S
Series
Visikom System with
Two CE-2-AC Telephones
