Owner’s Manual
TSD-MIX42RT
4x2 Mic/Line Mixer
AtlasSound.com
– 6 –
Specifications are subject to change without notice.
*ACK-C+AY"LVDs%NNIS4EXAS53!
4ELEPHONEs&AX
8.
Output Limiter Control
- Sets peak output levels by increasing or decreasing the sensitivity.
Ê / iÊÌiÀÊÊÊÌ iÊvÀÌÊ«>iÊ`V>ÌiÃÊÜ iÊÌiÀÊÃÊÊÕÃi°Ê
9.
Cable Management Retainer Points
- Use the rear panel screws for connecting the included cable
Ê ÀiÌ>iÀðÊ>V Ê/-ÊViÃÊÜÌ ÊÌÜÊV>LiÊÀiÌ>iÀÃÊvÀÊëwi`ÊV>LiÊ>>}iiÌ°
10.
Remote Level
ÊÊÀÊÀiÌiÊ}>ÊVÌÀ]ÊViVÌÊÌ iÊÌ>ÃÊ-Õ`Ê6£äÊÀÊiµÕ>®ÊÜ>Ê«>ÌiÊÌÊÊ
this terminals. Set dip switch 10 to control a mixed signal or Inputs 1, 2, and 3 signal only.
11.
DC Output (Remote LED)
ÊÊÊ£Ó6ÊÕÌ«ÕÌÊÃÊ«ÀÛ`i`ÊÌÊ«ÜiÀÊ>ÊÀiÌiÊÃÞÃÌiÊ" ÊÊ`V>ÌÀÊÊÊ
on the WPD-MIX42RT wall controller.
12.
Wall Plate Interface Input Selection
- Inputs 1, 2, and 3 can be remotely selected by shorting the
terminals 1, 2 or 3 to ground. The WPD-MIX42RT provides proper connectivity to easily do this.
Wall Plate Interface
The TSD-MIX42RT is designed to mate with the optional wall plate WPD-MIX42RT. This control
accessory allows you to select Inputs to be sent to the Output, along with a system level control and
a remote system on power indicator. To activate the input selection section, you must assign the
corresponding dip switch.
Note:
Placement of the WPD-MIX42RT can be placed up to 200 ft away
from the TSD-MIX42RT. The audio quality is not affected by the distance because no audio is present
at the WPD wall controller. All that is needed to obtain maximum system control is 8 conductors,
TSD-MIX42RT and a WPD-MIX42RT. Cat5 cable is ok to use.
Note:
Juke Box Override will not work
when Remote Wall Plate is activated.
