REV. 01
18 / 27
5.3 MOUNTING THE TIRE
It is utmost important to check the tire and rim to prevent tire explosion during
the inflating operations. Before beginning mounting operation, make sure that:
The tire and cord fabric are not damaged. If you note defects DO NOT mount
the tire.
The rim is without dents and is not warped. Pay attention to alloy rims, internal
micro-cracks are not visible to naked eye. This can compromise the rim and can
also be a source of danger especially during inflation.
The diameter of the rim and tire are exactly the same. NEVER try to mount a
tire on a rim if you cannot identify the diameter of both.
x
Lubricate the tire beads with the special grease in order to avoid damaging them and to
facilitate the mounting operations.
During rim locking MEVER keep your hands under the tire. For a correct
locking operation set the tire exactly in the middle of turntable.
x
For 10 to 20 inch wheels lock the rim using the inner part of the clamps.
x
For 12 to 22 inch wheels lock the rim using the outer part of the clamps.
When working with rims of the same size it is not necessary always to lock and
unlock the mounting bar; you only need to tilt and return the ram (P) with the
arm and the bar locked in their working positions.
Chains, bracelets, loose clothing or foreign objects in the vicinity of the moving
parts can represent a danger for the operator.
