❷
Rack mount (if desired).
Assure proper "Earth Ground"- see paragraph
Shields and Grounding
located in
Back Panel View
for detailed information.
❸
Connect each piece of equipment to be monitored to a separate & input terminal
(channel 1-8 or 1-16).
❹
Determine desired audio monitoring method and action.
METHOD
ACTION
A. Internal Speaker
No Action Required.
B. Headphone Jack
Plug in headphone. This automatically bypasses the internal speaker.
C. External Speaker
Connect external speaker to and
speaker out
terminals. If listening to both
internal and external speakers is desired; keep the speaker/headphone disconnect
jumper in the "on" position. If only the external speaker is desired; move the speaker/
headphone disconnect jumper to "off".
D. External Line Level
Connect line level source to and
line level out
terminals. If listening to both
the internal speaker and line level device is desired; keep the speaker/headphone dis-
connect jumper in the "on" position. If only the line level device is desired, move the
speaker/headphone disconnect jumper to "off".
❺
Perform any desired wire management and labeling functions.
❻
Connect the power supply (included) to the MVXA.
❼
Attach rear cover.
❽
Plug the power supply into a 110/120 VAC outlet.
25V
70V (Default Setting)
100V
Line Level
Jumper Setting
1 & 2
3 & 4
None
4 & 5
Reference Voltage
25 Vrms
70 Vrms
100 Vrms
1 Vrms
Power Ref. into 8 ohms
78 Watts
613 Watts
1250 Watts
0.13 Watts
Power Ref. into 4 ohms
156 Watts
1225 Watts
2500 Watts
0.25 Watts
1 2 3 4 5
+ - +
Speaker
Out
(3 Watts)
Line
Out
Power
15 VAC
-
Channel 1-8 or
Channel 1-16
Speaker/
Headphone
Disconnect
S
+ -
Shield Connection:
see "Shields
& Grounding" in
Back Panel View
for information.
Connections
for audio
signal
➊
Remove Rear Panel Cover and set jumpers for each input to desired reference
level (25V, 70V, 100V, or line level).
Each channel is independent so that signals of different types can be monitored on the same unit.
MVXA Series
Fast Install Overview
1 2
N o n e
3 4
4 5
WA R N I N G !
Detailed MVXA feature tour on the next four pages
Place jumpers
lengthwise only as
shown in these
diagrams!
Jumpers must be
adjusted before
applying power!
Set Each
Channel's
0 dB Reference
Level
+
-
+
-
+
-
A t l a s S o u n d
3
