Loeki and Bello User Guide
4. Operation
No part of this User Guide may be reproduced, stored in a retrieval system, or published, in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of Atlas Revalidatie Techniek BV.
© 2008 Atlas Revalidatie Techniek B.V.
15
Depth
•
The screw for adjusting the depth of the footrest is located at the side and bottom of the seat
(see illustration 19). Hexagonal key (Allen key) number 6 is required to make the adjustment.
•
Loosen the adjusting screws on both sides and place the bars to which the footrest is attached
in the desired position. Retighten the adjusting screws securely. Make sure that the bars on the
left and the right are at the same depth. Verify that the bars have been securely tightened.
•
The depth of the footrest must be adjusted so that the child is seated with the knees at a 90°
angle and so that the footrest provides support for the child’s entire foot.
Angle at the ankle joint (Bello only)
•
The screw for adjusting the angle of the footrest is located at the side of the footrest (see
illustration 20). Hexagonal key (Allen key) number 6 is required to make the adjustment.
•
Hold on to the footrest with one hand, loosen both adjusting screws and place the footrest in the
desired position. Retighten the screws securely and verify that the footrest is secure by pushing
down on it with your hands.
•
The possibility of adjusting the angle of the footrest even further increases the child’s potential
seating comfort.
Illustration 20:
Adjusting the angle of the footrest (Bello only).
Illustration 19:
Adjusting the depth of the footrest.
