OWNER'S MANUAL
Specifications are subject to change without notice
www.AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
© 2008 ATLAS SOUND LP
Printed in U.S.A.
ATS003064 RevA 3/08
5
AA-GPN1200
•
Never operate this product or touch the power supply cord during an electrical
storm, electric shock may result.
•
Never exceed the wattage on the product when connecting equipment. Fire and/or
property damage may result.
•
Operate the product only with the voltage specified on the unit. Fire and/or electric
shock may result if a higher voltage is used.
•
Do not modify, kink, or cut the power cord. Do not place the power cord in close
proximity to heaters and do not place heavy objects on the power cord, including the
product itself, doing so may result in fire or electrical shock.
•
Ensure that the safety ground terminal is connected to a proper ground. Never
connect the ground to a gas pipe as a catastrophic disaster may result.
•
Be sure the installation of the product is stable, avoid slanted surfaces as the
product may fall and cause injury or property damage.
Introduction
The Atlas Sound AA-GPN1200 analog signal generator is ideal to use for many basic
Sound Masking systems. The analog topology design eliminates repeating cycles commonly
found in other manufactures digital designs. The AA-GPN1200 supports selections between
Pink or White noise signals. This generator incorporates a variable balanced output and will
deliver a 1V balanced output allowing it to match input circuits of Atlas Sound equalizers
and amplifiers. Also a variable Hi-Cut filter when engaged, supports most equalizing
requirements for most basic Sound Masking systems. The EQ filter operating range is
between 1 kHz and 8 kHz with a slope of 6 dB per octave.
This small but effective generator can be used standalone or rack mounted. If multiple
zones are required up to three AA-GPN1200 can be mounted onto a single 1 RU panel.
The balanced output connection is via a Phoenix type (Euro block) connector. Rear-
mounted controls also help prevent unauthorized tampering.
