Step 2
Boot up
Once the IoT pH meter has been turned on, it will begin to boot up.
This process may
take up to 1 minute.
Once the boot up sequence is complete, you will be at the
Windows IoT core page.
If you want to connect a newtwork cable directly into the IoT pH Meter, there is a network
connection port located on the back. However, if you want to use Wi-Fi follow the steps
below.
To connect the IoT pH Meter to your Wi-Fi, press the gear ( ) button located at the
bottom left corner of the screen, then press
Network & Wi -Fi
.
From here, connect to the Wi-Fi network of your choice.
Step 3
Setup Network / Wi-Fi
Summary of Contents for IoT pH meter
Page 1: ...Users guide V 1 0...
