background image

 

 
 

LIMITED WARRANTY 

 
 
 
Atlas  Metal  Industries,  Inc.  warrants  to  the  Purchaser  of  this  product  that  the 
same shall be free from defects in the workmanship and material for a period of 
one year from the date of original installation of the equipment, but not to exceed 
eighteen (18) months after date of shipment from factory.  During this period of 
time  Atlas  Metal  Industries,  Inc.  will  replace  all  defective  parts  and  will  pay  for 
authorized  replacement  labor.  Replacement  and  installation  of  such  parts  and 
labor shall be provided only upon prior written authority of Atlas Metal Industries, 
Inc. 
 

The Refrigeration

 warranty is for a twenty (20) month time period and includes 

supplying  the  compressor  at  a  no  charge  basis  provided  the  damage  to  the 
compressor  was  not  caused  by  the  customer  or  end  user.    Authorized 
replacement labor will be paid for a period of one year from date of installation.  
Freight  costs  for  defective  unit  to  and  from  Atlas  Metal  Industries,  Inc.  are  not 
included,  and  all  defective  parts  must  be  returned  to  the  factory  freight  prepaid 
for evaluation.  

ALL WARRANTY LABOR MUST BE AUTHORIZED BY ATLAS 

METAL  INDUSTRIES,  INC.  PRIOR  TO  THE  ACTUAL  WORK  BEING  DONE.

  

This  warranty  does  not  apply  to  any  equipment  or  any  part  thereof,  which  has 
been  subjected  to  shipping  damage,  improper  voltage,  alteration,  abuse  or 
misuses, and does not cover loss of food, other products, or damage to property 
due to mechanical or electrical malfunction. 
 

THERE  ARE  NO  WARRANTIES  WHICH  EXTEND  BEYOND  THE 
DESCRIPTION OF THE FACE HEREOF.  SELLER DISCLAIMS ANY IMPLIED 
WARRANTY OF MERCHANTABILITY OF THE GOODS OR THE FITNESS OF 
THE GOODS FOR ANY PURPOSE AND BUYER AGREES THAT THE GOODS 
ARE SOLD “AS IS.” 

 
 
 
 

   

Summary of Contents for HB Series











Reviews: