1/6
AtlasIED.com
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
©20
15
Atlas S
ound L.P
. and Inno
vati
ve Electronic Designs, LLC.
All Rights R
eserved.
Atlas S
ound is a trademark of
Atlas S
ound L
.P. IED is a registered trademark of Inno
vati
ve Electronic Designs, LLC.
All other trademarks are the proper
ty of their respecti
ve owner
s.
All specs are subject to c
hange without notice.
ATS0
05347 R
evA 1
2/1
5
Safety Instructions
Please read carefully before installing or operating.
• Read all instructions carefully
• Heed all warnings
• Assure that the speaker is securely mounted
• Always assure amplifier power is off before making any connections
• Keep instructions for future reference
• Should any questions arise after reading this document, please call Atlas Sound Tech Support at 800-876-3333
Hearing Damage
CAUTION:
All professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to
avoid exposure to excessive levels that can cause permanent hearing damage.
Suspension and Mounting
Installing speaker systems requires training and expertise. Improper speaker installation may result in injury, death, equipment damage, and legal
liability. Installation must be carried out by fully qualified installers, in accordance with all required safety codes and standards at the place of
installation.
Legal requirements for overhead installation vary by municipality, please consult the Building Inspector office before installing any product and
thoroughly check any laws and bylaws prior to installation. Installers that lack the skills, training, and proper ancillary equipment to install a speaker
system should not attempt to do so.
Installation
1. Run the wiring from the power amplifier to the location desired for mounting the ALA Series speaker.
2. Attach the lower wall bracket to the wall. Use a level to be certain that the wall bracket is straight. Secure the wall bracket to the wall. Be sure to
use the appropriate wall anchors when attaching the bracket. Use all four screw holes for maximum integrity and safety.
Note:
Hardware for attaching the wall bracket to the wall is not included.
ALA10T
Installation Instructions
Fig. 1
