©2022
Atlas Sound LP
. T
he
Atlas
“Circle
A”
, Soundolier
, and
Atlas Sound are trademarks of
Atlas Sound L.P
. IED is a R
egistered
Trademark of Inno
vativ
e Electronic Designs LLC.
All rights reser
ved.
All other
Trademarks are propert
y of their respectiv
e o
wners. No endorsement is implied. Due to continual product de
velopment, specifications are subject to c
hange without notice.
ATS0
07063 R
evA 6/22
AtlasIED.com
TELEPHONE: (800) 876-3333
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Dante Control Software & Device Information
Signal routing and system configuration with Dante is fast, simple, and incredibly flexible. Audinate’s Dante Controller is a powerful software
application that manages devices on the network. Setting up a Dante network is typically just a matter of plugging devices into an Ethernet switch and
connecting a computer to the network. All Dante devices are automatically discovered and displayed in Dante Controller, so a system can be up and
running in seconds. To download Dante Controller visit www.audinate.com
It is extremely important when selecting a router or switch for the Dante network; not all routers or switches are the same. The size of the Dante
network will influence which router or switch is needed to handle network traffic. There are three things to look for at a minimum or system dropouts
may occur. Refer to Audinate for products they recommend.
• Gigabit speed.
• Network switch, it must be a “managed switch” type.
• A router with a built-in switch, it should have DD-WRT firmware or Open Source firmware.
Dante Controller Viewer DA-22SYS Product Information
• Product Model Name (Fixed) is DA-22SYS
• Dante Device Name (User Changeable) is DA-22SYS- XXXXXX, X is last 6 characters of the MAC address.
• DA-22SYS Dante configuration, 1 RX Channel, no TX Channels
