KIT AUTO
INSTALLATION, USE AND MAINTENANCE MANUAL
Dear Customer, congratulations on choosing this Made in Italy ATLAS FILTRI product.
Please carefully read and keep this document that will help you best enjoy and use all our products. Continue to prefer us and beware of
imitations. KIT AUTO is suitable to the HYDRA self cleaning filters series and to the filters series with discharge system PLUS S 3P BX and CX,
DP S and DP S DS, K PLUS S 3P and K DP S.
- The “AUTO KIT” cyclical timer cyclically operates the solenoid valve at each interval set and for the set time.
- The interval and time are programmable:
Interval: 1-255 hours
Time: 1 to 255 seconds
SOLENOID VALVE CONNECTIONS
- Screw in the nipple with O-ring on the bottom of the cup.
- Screw in the solenoid valve, being careful that the flow direction arrow faces down.
- Screw the drain funnel or hose fitting onto the solenoid valve.
- Connect the programmer connector to the specific solenoid valve housing.
BUTTONS
SET button:
used to program the system.
MANUAL button:
operates the washing solenoid
valve.
PROGRAMMING
Connect the power supply by keeping the SET
button pressed:
1
The display shows the words “SETTING
DURATION” (to set the washing time)
Release the SET button and follow the instructions
on the display:
2
The display shows the words “INCREASE
PRESS ST” - to increase the washing time (in
seconds), press and hold down SET until the
desired interval is reached (the display will
show the values increased in seconds, with the
display flashing).
3
Then the display shows the words “DECREASE
PRESS ST” - to decrease the washing time (in
seconds), press and hold down SET until the
desired interval is reached (the display will
show the values decreased in seconds, with
the display flashing).
At this point, sequences 1-2-3 will be repeated
again to be able to correct any errors.
4
The display shows “SETTING LAPSE” (to set the
interval between two subsequent washes)
Manufacturer’s identification: ATLAS FILTRI s.r.l.
Headquarter: via Pierobon, 32 | Production site: via del Santo, 227
I-35010 Limena, Italy - Tel. +39.049.76.90.55 Fax +39.049.76.99.94
www.atlasfiltri.com
EN