Problem Solution
Fan will not start
1. Check circuit fuses or breakers
2. Check line wire connections to the fan and switch wire connections in the
switch housing. CAUTION: Make sure main power is off.
3. Check that the battery of the remote is functional.
4. Re-do steps for programming on page 6.
Fan sounds noisy
1. Make sure all motor housings screws are tight.
2. Make sure the screws that attach the fan blade bracket to the motor hub is
tight.
3. Make sure wire nut connections are not rubbing against each other or the
interior wall of the switch housing. CAUTION: Make sure main power is off.
4. Allow a 24-hour “breaking-in” period. Most noise associated with a new fan
disappear during this time.
5. If using an optional light kit, make sure the screws securing the light plate are
tight.
6. Some fan motors are sensitive to signals from solid-state variable speed
controls. If you have installed this type of control, choose and install another
type of control.
7. Make sure the upper canopy is a short distance from the ceiling. It should not
touch the ceiling.
Remote control
malfunction
1. Do not connect the fan with a wall mounted variable speed control(s).
2. Make sure the dip switches are set correctly.
Fan wobble
1. Check that all blade and blade arm screws are secure.
2. Most fan wobbling problems are caused when blade levels are unequal.
Check this level by selecting a point on the ceiling above the tip of one of the
blades. Measure this distance. Rotate the fan until the next blade is
positioned for measurement. Repeat for each blade. The distance deviation
should be equal within 1/8”.
3. If the blade wobble is still noticeable, interchanging two adjacent (side by
side) blades can redistribute the weight and possibly result in smoother
operation.
WARNING: TO REDUCE THE RISK OF PERSONAL INJURY. DO NOT BEND THE BLADE
ARM WHILE INSTALLING, BALANCING THE BLADES, OR CLEANING THE FAN. DO
NOT INSERT FOREIGN OBJECTS BETWEEN ROTATING FAN BLADES.
Fan has jerky
movement
1. Turn the AC power off to fan, and re-do steps for programming on page 6.
Fan has lost its
programming
repeatedly
1. Turn the AC power off to a fan, and re-do steps for programming on page 6.
2. Do not turn off fan from wall switch. Use only remote to regulate fan.
8
10. TROUBLESHOOTING
