Specifications
-
TEX 318
Net Weight
6.4 kg
18 lbs
Length
387 mm
15.25 in
Bore
29 mm
1.125 in
Stroke
102 mm
3 in
Blows per minute
2200
2200
Chuck Sizes
14.8 mm Hex .580 in Hex
17.5 mm Rnd .680 in Rnd
Air Inlet (NPT)
10 mm
3/8 in
Air Consumption*
.89 m
3
/m
31.5 cfm
Atlas Copco TEX 319
Operation
Make sure you have:
steels sharpened correctly for the job.
correct posture, feet spread and away from the working
end of the tool.
both hands clear of the steel, especially when using the
tool in an elevated position.
the steel in contact with the work surface before
pressing the trigger.
blank
-
firing will cause premature retainer wear.
follow local laws and safety procedures.
Optional Equipment
The following optional equipment is available from Atlas
Copco:
MANTEX lightweight airhose
VAM water separators
Steel Accessories
Maintenance
For best results and security:
always check that hammer is disconnected from the air hose before removing steel
clean and inspect hammer every 3 months.
always keep the hammer well lubricated during work and storage.
flush the hammer with paraffine
-
based lubricant before long
-
term storage. Follow with a normal lubrication and a
short period of operation. Always store in a dry place.
