Atlas Copco PowerMACS 4000, User Manual

Page: 112 / 668

Set Up and Maintenance
112 9836 3521 01
4.2 Setups and How to handle them
A setup is a group of data that completely describes how a system should work. The PowerMACS system
uses the information in the setup to know what to do. A setup can also be called a configuration . A setup
can be stored on the console computer in a file on a hard disk or on a usb memory stick. It can be
downloaded to the system, or uploaded for storing or modification.
Most items on the File menu handle setups.
Use the New item to create a completely new setup. This is described in chapter: Set up of a new
system .
With the Open item you open an existing setup, to alter or just to check. When you are ready with a setup
you can use Close to close the setup.
If you have opened a setup and made modifications to it you can save these to disk by selecting Save .
You can also rename it by using Save as . Then the original setup will be kept. This is a also a fast way of
creating new setups by starting from a similar one.