Technical data
Machine data
Rammer leg width 330 mm (13 in.)
Rammer leg width 280 mm (11 in.)
LT 800
Engine
Hatz 1B20, manual start
Hatz 1B20, manual start
Manufacture/Model
3 (4.0)
3 (4.0)
Power kW (hp)
3,050
3,050
Rated speed (r.p.m)
1,000
1,000
Idling (r.p.m)
Compaction data
12 (720)
12 (720)
Vibration frequency, Hz (r.p.m)
75-85 (2.9-3.3)
75-85 (2.9-3.3)
Amplitude, mm (in)
Performance
13-16 (43-52)
13-16 (43-52)
Working speed m/min (feet/min)
Fluid volumes
3.0 (3.2)
3.0 (3.2)
Fuel tank capacity, litres (qts)
0.9 (0.95)
0.9 (0.95)
Engine oil, litres (qts)
0.7 (0.74)
0.7 (0.74)
Fuel consumption, l/h (qts/h)
0.9 (0.31)
0.3 (0.31)
Rammer leg, l (qts)
Lubricants
Use diesel oil that complies with EN 590 or
DIN 51601
Use diesel oil that complies with EN 590 or
DIN 51601
Fuel type
Shell Rimula R4 L 15W-40
Shell Rimula R4 L 15W-40
Engine oil
Shell Rimula R4 L 15W-40
Shell Rimula R4 L 15W-40
Rammer leg oil
Weights and volumes
84 (185)
83 (183)
Weight, kg (lbs)
85 (187)
84 (185)
Operating weight, EN500, kg (lbs)
Noise and vibration declaration statement
Guaranteed sound power level
Lw
according to ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level
Lp
according to ISO 11201, EN500-4:2006+A1:2009.
Vibration value determined according to ISO 20643, EN500-4:2006+A1:2009. See table ”Noise and vibration
data” for the values etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other machines tested in accordance
with the same directive or standards. These declared values are not suitable for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
machine is used, as well as upon the exposure time and the physical condition of the user, and the condition
of the machine.
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared
values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This machine may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
© 2011 Atlas Copco Construction Tools AB | No. 9800 1139 01 | 2011-04-01
Original instructions
20
LT 800
Safety and operating instructions
