manualshive.com logo in svg

Atlas Copco HiLight H6+ DC, Instruction Manual, Page: 65 / 116

Share
Download
Atlas Copco HiLight H6+ DC Instruction Manual Download Page 65

- 65 -

7

Options available for 
HiLight H6+ units

7.1

Overview of the mechanical 
options

The following mechanical options are available:
– Cold weather
– Anti glare
– Undercarriage
– Wheel chocks
– Towing eyes - ball coupling
– Towing eyes - DIN
– Towing eyes - France
– Towing eyes - GB
– Towing eyes - NATO
– Towing eyes - loose ball coupling
– Chalwin V
– Spark arrestor
– Special colour canopy (both AC grey and AC

yellow change to custom colour)

– Special colour frame

7.2

Description of the 
mechanical options

7.2.1

Cold weather

This option consists of synthetic oil and a higher
capacity battery.

7.2.2

Anti glare

Plastic cover add-on to avoid excess of glare.

7.2.3

Undercarriage

There are 3 variants of undercarriage available for
HiLight H6+ light towers. Each variant has its own
specific features. An overview is given hereafter.

Not homologated for road use (max speed 
20 km/h)

This undercarriage provides:
– Fixed towbar, without inertia coupling 
– Rigid axle, without brake
– Adjustable support
– Wheel
– Mudguard

00_00_HiLight H6+_EN.book  Page 65  Friday, June 4, 2021  11:52 AM

Summary of Contents for HiLight H6+ DC





















































































































Reviews:

No comments