G2422-1
EN
Product information
© Atlas Copco Industrial Technique AB - 9839 0485 01
7
• Never use grinding wheels attached with an adapter as this machine is not
fitted with a wheel guard
• Never attach circular saw blades or other cutters than the abrasive wheels or
brushes specified for the tool
Technical data
Ordering No
8423031247
Model
G2422-1
Max wheel diameter
- mm (- in)
Max pad diameter
- mm (- in)
Spindle thread
-
Spindle length
- mm (- in)
Air inlet thread
1/41/4 in
Air consumption at free speed
10.3 l/s (21.8 cfm)
Air consumption at max output
13.0 l/s (27.5 cfm)
Max working pressure
7 bar (102 psig)
Max free speed
20000 r/min (20000 rpm)
Max output
0.35 kW (0.47 hp)
Motor type
Vane
Recommended hose size (d x l)
10 mm x 3 m (3/8 in x 10 ft)
Weight
0.7 kg (1.5 lb)
Service overview
Maintenance and service instructions
The service must only be done by authorized workshops or qualified ser-
vice technicians.
WARNING Polymer hazard
The vanes in this product contain PTFE (a synthetic fluoropolymer). Due to
wear, there might be PTFE particles inside the product. Heated PTFE can
produce fumes which may cause polymer fume fever with flu-like symp-
toms, especially when smoking contaminated tobacco.
Health and Safety recommendations for PTFE must be followed when han-
dling vanes and other components:
►
Do not smoke when servicing this product
►
PTFE-particles must not come in contact with open fire, glow or heat
►
Motor components must be washed with cleaning fluid and not blown
clear with an air line
►
Wash your hands before starting any other activity
Replacement of vanes
Replace the vanes in the motor when a power drop of the tool is experienced. If
the vanes are not replaced in time other motor parts may be damaged. For in-
creased life length of the vanes use an oil lubricator to dose oil into the air inlet.
