Atlas Copco AX28E, Safety And Operating Instructions Manual

Page: 15 / 25

1. Assemble the vibrating element in the reverse
order. Clean all parts before the assembly.
2. Replace the damaged parts and the O-rings
systematically.
3. Fill the vibrating elements with oil. (See the
section Lubrication for information about type
and amount of oil.)
NOTICE Carefully clean the threads on the end cap
and the tube before gluing with LOCTITE®638™ .
The treads must be perfectly clean and contain no
residues of oil or dust.
LOCTITE is a registered trademark of Henkel
Corporation. 638 is a trademark of Henkel
Corporation.
Operating hose AX36 and
AX40
Disassembly
1. Cut off the hose clamps (A) at both ends of the
switch box.
A A D
B
C
E F
G
2. Remove the screws (B) and remove the switch
box cover and disconnect all wires from the
switch.
3. Cut the collar (D).
4. Remove the hose (E) from the switch box.
5. Remove the lcable lock and pull out the wires
from the hose on the switch box side.
6. Remove the cable holder from the switch box
and unscrew the gland (F).
7. Unscrew the switch.
Assembly
1. Proceed in reverse order. Change the membrane
(G) if necessary.
2. Use compressed air to blow a cord into the hose
from the switch box side.
3. Attach the cord to the wire harness and draw the
harness into the hose.
Operating hose AX48, AX56
and AX65
Disassembly
1. Cut off the hose clamps (A) at both ends of the
switch box.
A E F A
G
D
B
C
2. Remove the screws (B) and remove the switch
box cover and disconnect all wires from the
switch.
3. Cut the collar (D).
4. Remove the hose (E) from the switch box.
5. Remove the cable lock and pull out the wires
from the hose on the switch box side.
6. Remove the cable holder from the switch box
and unscrew the gland (F).
7. Unscrew the switch.
Assembly
1. Proceed in reverse order. Change the membrane
(G) if necessary.
2. Use compressed air to blow a cord into the hose
from the switch box side.
3. Attach the cord to the wire harness and draw the
harness into the hose.
Operating hose AX28E, AX48E
and AX56E
Disassembly
© 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29
Original instructions
14
AX 36, 40, 48, 56, 65, 90, 28E Safety and operating instructions