09
EN
Monitoring area
When installing the camera, it’s not suggested to
make the PIR sensor vertically face the moving
object.
Please note that if the moving object approaches
the PIR sensor vertically, the PIR sensor may not
detect the motion events.
You are advised to install the camera with an angle
higher than 10° between the PIR sensor and the
object for an effective motion detection.
Entrance
Moving
object path
IDEAL
DISTANCE
2-10 meters
Installation type
The camera has been designed
to operate indoor in environmen-
ts with Wi-Fi coverage.
The silicone cover with UV
protection enables to use the
camera outdoor in a controlled
environment (example:
balcony) and it must be never
exposed to direct sunlight
and/or atmospheric agents
(example: rain, snow).
In case of outdoor use in a
controlled environment, please
check Wi-Fi coverage and
consider the effect of tempera-
ture on battery life (we suggest
to set the PIR sensitivity on the
lowest level).
It is recommended therefore to
respect the above conditions.
On the contrary the warranty
will not be valid.
Note:
- The PIR sensor’s detecting angle: 120° (H)
- The PIR sensor’s detecting distance: 6mt (in default)
