24
Camera
UTC Remote controller
Wall Mount kit and tools
Manual (English, Italian)
Warranty Card
If any item contained is damaged or missing, please contact your local
dealer as soon as possible.
1.2 Cabling
Ensure the camera is fixed (using the 2 screws) securely otherwise it may fall and
cause injury.
Now You can change the camera Pan/Tilt in order to satisfy your installation. Use
the wrench to release the screw, the adjust and move it up/down.
Align the mounting rings so that the arched area is above the IR LED light. Make
sure the ring does not cover any part of the IR LED light (right image) because it
will reflect the light back into the camera during nighttime.
In the end connect the DC Adapter (isn’t included) or power distribution box to the
Camera (using a Power Connector Adapter) or connect directly the device to DVR.
Do not focus the camera on the sun directly.
Ensure the camera is fixed securely otherwise it may fall and
cause injury.
UTC Remote controller is able to manage also remotely the
camera instead of OSD cable manual control.