![background image](http://html1.mh-extra.com/html/atlantis/v420-10w/v420-10w_user-manual_3000525022.webp)
22
Use the wrench to release the screw, the adjust and move it up/down. Use the
wrench to release the screw and do 360° rotation angle mobilization.
In the end connect the DC Adapter (isn’t included) or power distribution box to the
Camera (using a Power Connector Adapter) or connect directly the device to DVR.
(Camera V 600D-30W):
Unscrew the three mounting screws on the bottom
mounting plate half way using the Allen Wrench. Do not unscrew the screws all
the way, unless you have a safe place to store the screws.
Now You can change the camera Pan/Tilt/Zoom/Focus in order to satisfy your
installation. Use the wrench to release the screw, the adjust and move it
up/down. Use the wrench to release the screw and do 360° rotation angle
mobilization.
Align the mounting rings so that the arched area is above the IR LED light. Make
sure the ring does not cover any part of the IR LED light (right image) because it
will reflect the light back into the camera during nighttime.
In the end connect the DC Adapter (isn’t included) or power distribution box to the
Camera (using a Power Connector Adapter) or connect directly the device to DVR.