Atlantis TP-701, Operation Manual & Spare Parts List

Page: 13 / 38

Description of the Safety Devices
The machine is turned on when connected to the main supply and the main switch
QS1 switched to ON position. After approximately 1 minute when the heating
element has reached its operating temperature, the machine is ready for use.
The machine is switched on and off with the main switch QS1 which is located on
the machine front operating panel.
If it is necessary to make adjustments inside the machine during operation, for example
after a strap jam, the table top can be unscrewed. In this case the safety switch B6
cuts off a the supply voltage to the power supply unit and to the heating controller on
all poles.
Then all electrical circuits as well as the power boards are de-energized. As soon as the
problem has been eliminated the table can be closed and the machine can be operated
again.
(3) Electrical Specifications
System configuration:
1L+N+PE 1L+N+PE
Nominal power: 0.5kW 0.5kW
Rated current: 3A 5A
Rated voltage: 220V/230V/240V 110V
Rated frequency: 50Hz 60Hz
Type of current: 1AC 1AC
Minimum Requirements
The electrical supply line for the machine has to have a minimum cross-section of
at least 3 x 1.0 m
㎡
.
Maximum fuse protection for the suply line may be up to 10 amps. The machine is
connected to a 10 amps earthed 3 pin plug.
The machine must be set up in dry rooms only.
-10-