Any revisions must first be approved by the product designer. Version: 201710
Revision By: TD
SLIDING SCREEN FITTING INSTRUCTIONS
–
SL3F/SL4
Components:
Other equipment required:
1 x Bag 1
No 1 Square Drive Screwdriver
1 x Bag 11
Phillips Screwdriver
1 x Bag 114 SL
Caulking Gun
1 x
Handles Set ‘NF’ SL
Drill
1 x Roller Set
Level
1 x
Clear Silicon
Pencil
1 x
Blue Masking Tape
Tape Measure
1 x
Bumper Pack (6)
1 x Screen Fitting Instructions
Checked by: ___________________
Date: _________________________
Included with this shower package:
1 x Glass Door with 2 large holes
SL B
1 x
2.5mm Hex Key
1 x Plain Fixed Panel
21 B
1 x
4mm Drill Bit
1 x Handle Set
SL
8 x
Long Screws
–
sq. drive
1 x Roller Set
8 x
Wall Plugs
2 x End Connector Channels and Spacers
1 x
Blue Masking Tape
1 x Top Rail Brace
1 x
Vertical Seal
1 x Silicon Spatula
Plastic Packers
–
various sizes
1 x
Tube of Clear Silicon
Bumper Set
SL3F package includes:
SL4 package includes:
1 x
Glass Receiver channel
Tube 86 LH/RH
1 x
3mm Drill Bit
1 x 3mm Drill Bit
1 x
4mm Hex Key
2 x
Glass Receiver Channels
Tube 85
1 x
Fixed Panel with 2 holes
HZ-F
PLEASE NOTE:
Stand glass upright at all times. Keep glass panels level with the floor to avoid damaging
corners.
NO RESPONSIBILITY WILL BE TAKEN BY ATLANTIS FOR ANY GLASS BREAKAGES OR CHIPPED EDGES.
