PoE Port:
PoE
Status
(Green)
On:
When the PoE powered device (PD) was connected and
the port supplies power successfully.
Flash Slowly:
When the power output to PD has exceeded
the single port output power 15.4W/30W.
Off:
No PoE powered device (PD) connected or the single
port output power more than 15.4W, device has stop
supplying the power to the single port (this is to protect the
PoE switch from overheating problem and to stabilize the
power transmitting to the other PoE PDs port).
SEV Selector
OFF:
Standard Mode
EXTEND:
Enhanced Mode (up to 200mt@10Mbps on the
PoE port). Max 15.4W
VLAN:
Vlan mode
These ports are PoE Enabled ports, the PoE port will automatically
activated when a compatible terminal is identified, the Switch will
supply power through the Ethernet port to the connected PoE
device. For the Legacy devices that are not yet compatible, the
PoE port will not offer the power to this device. This feature allows
users to freely and safely mix legacy and Power over LAN
compatible devices on their network .
4.2
Rear Panel
Power is supplied through an external AC/DC (52V, 1,25 or 2.5A) power adapter.
Since the NetPower does not include a power switch, plugging its power adapter into
a power outlet will immediately power it on.
5.
Support
For technical questions and support, please contact our help-desk by ticket on
http://www.atlantis-land.com/ita/supporto.php
. For generic information, please
send an e-mail to
.
For presales information, please send an
e-mail to
.
ATL SrL
Via C. Chiesa 21, 20010 Pogliano Milanese (MI), Italy
Website: http://www.atlantis-land.com
Email: [email protected]
