20
Auto-MDI function
supports automatic MDI/MDIX crossover detection
function gives true „plug and play‟ capability without the need of
confusing crossover cables or crossover ports.
Auto-negotiation for any port.
This allows for auto-sensing of speed
(10/100Mbps) thereby providing you with automatic and flexible
solutions in your network connections.
Flow control for any port.
This minimizes dropped packets by
sending out collision signals when the port‟s receiving buffer is full.
Note that flow control is only available in half duplex mode.
Data filtering rate
eliminates all error packets, runts, etc., per port at
wire-speed for 100Mbps speed.
Green Function:
This technology allows to reduce the power
consumption up to 45%*.
1.4
Package Contents
Unpack the package and check all the items carefully. Also, keep the box and
packing materials in case you need to ship the unit in the future. The package
should contain the following items:
1 x NetMaster F5(8)P
1 x External power supply (9V, 0,8A)
1 x Multilanguage Manual (English, Italian and Francais)
1 x Warranty Card
If any item is found missing or damaged, please contact your local reseller for
replacement.
2.
Cabling and setup
2.1
Setup
The setup of the Switch can be performed using the following steps:
Make sure that there is proper heat dissipation from and adequate
ventilation around the Switch
Do not place heavy objects on the Switch.
Visually inspect the DC power jack and make sure that it is fully secured
to the power adapter.