Atlantis NetFly AP3 WN, Manual, Page: 14 / 57

14
to the NetFly AP3 WN either directly or through an external Switch, and have
TCP/IP installed and configured to obtain an IP address through a DHCP server or a
fixed IP address that must be in the same subnet of the NetFly AP3 WN. The default
IP address of the NetFly is
192.168.1.252 and subnet mask is 255.255.255.0 .
The best and easy way is to configure the PC ( DHCP client ) to get an IP address
from the NetFly AP3 WN ( DHCP server ).
Please follow the steps below for PC’s network environment installation. First of all,
please check your PC’s network components. The TCP/IP protocol stack and
Ethernet network adapter must be installed. If not, please refer to MS Windows
relative manuals.
 Username: admin
 Password: atlantis
 IP LAN address: ( 192.168.1.252 ), Subnet Mask ( 255.255.255.0 )
 IP WAN adress: client DHCP
 DHCP Server: enalble ( 192.168.1.10-192.168.1.50 )
 SSSID= A02-AP3-W300N
 Channel= 6 , Authentication: WPAPSK , Encrypton: AES , Encryption Key:
NetFlyAP3WN
7. INTERNET EXPLORER CONFIGURATION
Now open IE, go to Instruments menu, select the Connections tab and select
one of the following options:
 Never use remote connection
 Use remote connection if another network connection isn’t available
8. TCP/IP CONFIGURATION
Configuring PC (Windows 2000)
 Go to Start / Settings / Control Panel . In the Control Panel, double-
click on Network and Dial-up Connections .
 Double-click LAN Area Connection/Wireless .
 In the LAN Area Connection/Wireless Status window, click
Properties .
 Select Internet Protocol (TCP/IP) and click Properties .
 Select the Obtain an IP address automatically and the Obtain DNS
server address automatically radio buttons.