Atlantis NetDVR V400, Quick Start Manual, Page: 65 / 89

65
Alarm
Clicking on , then Alarm , You can set up parameters of the remote DVR.
 【
I/O Alarm
】
Set up alarm detector output mode
 【
Motion detect
】
When the motion detection switch is “on”
，
the motion detection
area works. When there are any motions in the selected channel, the alarm function
will work immediately, and Record simultaneously.
 【
Sensitivity
】
Adjust the sensitivity of the trigger alarm to prevent wrong alarms
 【
Alarm Output
】
Output time delay of the outer-connected alarm apparatus
 【
Buzzer
】
Time delay of the inner Buzzer in the DVR

【
Post Rec
】
When alarms is over, continue recording time.
EMAIL Set up the email to receive the alarm emails (this function is not applied by default); You
should search the relative email parameters through internet, this function supports
sending and receiving the captured alarm pictures.