28
1.4 Cabling
Wall mounting and Ceiling mounting
Attach the alignment sticker to the wall/ceiling and drill two pilot holes into it.
Hammer the supplied plastic anchors into the holes.
Align the three holes on the base of camera with the three plastic anchors on
the wall and ceiling, insert the supplied screws to the corresponding hole and
screw them.
Connect all cables:
In the end connect the AC-DC Adapter (12VDC, 1A included)
to socket then to the NetCamera (connect an Ethernet cable to the Ethernet
connector located on the Internet Camera’s backpanel and attach it to the network)
or use Power over Ethernet IEEE 802.3af Class 0 suppliers in order to send power to
the camera via the network (PoE Injector isn’t included). Once you’ve done all the
connections the product will carry on immediately a autotest (120 seconds).