17
1.10 Inserimento dei dischi
Seguire le istruzioni seguenti per l’inserimento dell’ Hard Disk nel DiskMaster.
Aprire lo sportello anteriore ed estarre i 2 cassetti (schiacciare il bottone per
far inclinare la leva di bloccaggio).
Rimuovere le 4 viti fissate nella parte posteriore del cassetto (figura 1)
Inserire il disco SATA e bloccarlo con le vite precedentemente rimosse (figura
2)
Reinserire il cassetto nel DiskMaster sino a fine corsa e premere la leva sino al
blocco (figure 3 e 4)
Collegare l’alimentatore alla rete elettrica e poi inserire il jack nel retro
dell’apparato. Collegare il dispositivo alla LAN tramite il cavo fornito.
Accendere a questo punto il dispositivo, premendo il tasto power per 3
secondi almeno sino a che il LED power è acceso in verde.
Le seguenti immagini illustrano i punti precedenti.