Atlantis A02-RA111-WN, Quick Start Manual, Page: 43 / 64

43
2.2 Browser configuration
Open the web browser, enter the local port IP address of this WebShare
Wireless N ADSL2+ Router, which default at
192.168.1.254 , and click Go to get
the login page.
The default username is admin , password atlantis and click “OK” to continue. At
the configuration homepage, the left navigation pane where bookmarks are
provided links you directly to the desired setup page, including:
 Quick Start (Run Wizard)

Interface Setup (Internet, LAN, Wireless)
 Advanced Setup (Routing, NAT, ADSL, QoS, Firewall)
 Acess Management (ACL, IP Filter, SNMP, UPnP, DDNS)
 Maintenance (Administration, Time Zone, Firmware, SysRestart,
Diagnostics)
 Status (Device Info, System Log, Statistics)
 Help
Click on the desired item to expand the page with all settings in the main
navigation panel.
Following next steps you can make operating WebShare Wireless Router ADSL2+
in short time using PCs in DHCP mode. Refer to manual on Installation CD if you
need personalized configuration.
If the ADSL Led flashes periodically You have to force
modulation. Click on Advanced Setup, then ADSL . On the
combo-box ADSL Mode please choose ADSL
modulation , then click on Save .
Click on Quick Start then Run Wizard to perform an automatic protocol selection.
The following screen will appear. Please click Next to continue.
You can change the password as you like and then click Next to continue.
Select your time zone from the drop down list. Please click Next to continue.

Select how the router will set up the Internet connection: PPPoE/PPPoA: to
obtain IP automatically (You need username and password).
 Static IP address: this configuration is valid in case of a subscription with
a static IP.