Atlantis A02-PL303-WN, User Manual

Page: 15 / 68

15
6. Default SETTINGS
The NetPower 303 WN can be configured with your Web browser. The web
browser is included as a standard application in following operation systems, UNIX,
Linux, Mac OS, Windows XP/2000/Vista/7, etc. The product provides a very easy
and user-friendly interface for configuration.
Before Configuration
This section describes the configuration required by LAN-attached PCs that
communicate with the NetPower 303 WN, either to configure the device, or for
network access. These PCs must have an Ethernet interface installed properly, be
connected to the NetPower 303 WN either directly or through an external Switch,
and have TCP/IP installed and configured to obtain an IP address through a DHCP
server or a fixed IP address that must be in the same subnet of the NetPower 303
WN. The default IP address of the NetPower is
192.168.1.251 and subnet mask is
255.255.255.0 . The best and easy way is to configure the PC ( DHCP client ) to
get an IP address from the NetPower 303 WN ( DHCP server ). For the first time
please connect the PC directly to NetPower 303 WN.
Please follow the steps below for PC’s network environment installation. First of all,
please check your PC’s network components. The TCP/IP protocol stack and