ENGLISH
36
RFC1483 routed / IpoA routed
These are configuration parameters:
•
VPI: 0
or
1
(check with your ISP)
•
VCI: 38
or
50
(check with your ISP)
•
NAT:Enable
•
Encapsulation
: please use
LLC Routed
. If You have
problem You have to check with your ISP about which
Encapsulation Method is adopted.
Select
Use the following IP address
•
IP Adress
: Insert your Public IP
•
Subnet Mask
: Insert Netmask provided by ISP
•
Gateway
: Insert router Default Gateway
Press
Apply
and then click on
Save Config to Flash.
Now You can check on the section
Status
if connection is
up and You can begin navigation. For every other problem
refer to Manual or Multimedia Guide on attached cd-rom.
Summary of Contents for WEBSHARE 241
Page 2: ......
Page 8: ...MULTILANGUAGE QUICK START GUIDE 8 A02 RA241_GX01 V1 0 December 2005...
Page 60: ...DEUTSCH 60...