33
For more detailed instructions on configuring and using the
WebShare Wireless
Router ADSL2+, please refer to the online manual or
Interactive guide on the CD (Vera).
Before beginning the configuration of the Router you have to know the parameters of
your subscription ADSL.
There are five ways
─
PPPoE, PPPoA, RFC1483 routed, IPoA, RFC1483 Bridge
─
for the
device to have a public IP address and then to access Internet. You have to check
with your ISP about which way is adopted.
VPI/VCI:
Consult the telephone company to get the Virtual Path Identifier (VPI) and
Virtual Channel Identifier (VCI) numbers. The valid range for the VPI is 0 to 255 and
for the VCI is 32 to 65535. The default value VPI is 0 and VCI is 32.
For BT (VPI=0, VCI=38) and for KC (VPI=1, VCI=50). NAT:
The NAT feature
allows multiple-user Internet access for the cost of a single IP account. If you need to
have a public server or a public network, NAT has to be disabled.
Encapsulation Method:
Be sure to use the encapsulation method (LLC/SNAP or VC
MUX) required by your ISP. Gather the information as illustrated in
the following table and keep it for reference.
PROTOCOL
INFORMATION
PPPoE
VPI and VCI
VC-based / LLC-based multiplexing
Username and Password
Service Name
PPPoA
VPI and VCI
VC-based / LLC-based multiplexing
Username and Password
RFC1483
Bridged
VPI/VCI
VC-based / LLC-based multiplexing
RFC1483
Routed
VPI/VCI
VC-based / LLC-based multiplexing
IP address
Subnet mask
Default Gateway (IP address)
Summary of Contents for WebShare 141 W
Page 1: ......
Page 43: ...43...
Page 62: ...62...
Page 67: ...Via Pelizza da Volpedo 59 Cinisello Balsamo MI Italy info atlantis land com...
