33
Then
IP Filtering Configuration
window will appear.
Step 1:
From the
IP Filtering Configuration
screen, select the WAN profile of interest from the
pull down menu. For example, if your only need is to access the Internet, you should only select
the Internet
access profile.
Step 2:
Select
send
or
discarded
as desired, which is equivalent to allow and disallow,
respectively.
Step 3:
If you are just starting, click
Add
to add a new selection rule. If you have previously
defined rules, you will see those rules shown as entries in the rule table, and you can edit the rule
by first highlighting the desired entry in the rule table followed by clicking the
Edit
button.
Step 4:
In case of adding a new selection rule, the following screen shows.
If you highlighted an existing entry in the
IP Filtering Configuration
window and clicked
Edit