manualshive.com logo in svg

Atlantis Land A02-RB-W54, User Manual, Page: 10 / 86

Share
Download
Atlantis Land A02-RB-W54 User Manual Download Page 10

                                                              

Wireless Broadband Router 

A02-RB-W54                                                   Pag. 3  

1.4 System Requirements

 

Before installing the device, your PC should meet the following: 

•

 

Intel® Pentium®III 600Mhz or compatible processor with TCP/IP stack 

•

 

Iinternet Explorer V6.0 on Netscape V6.0 

•

 

CDRom 

 

1.5 Setup  

The setup of the Wireless Broadband Router can be performed properly using the 
following methods: 
 

•

 

The power outlet should be within 1.82 meters (6 feet) of the Broadband 

Router. 

•

 

Visually inspect the DC power jack and make sure that it is fully secured 

to the power adapter. 

•

 

Make sure that there is proper heat dissipation from and adequate 

ventilation around the Broadband Router.  Do not place heavy objects on 
the Broadband Router. 

 

Fix the direction of the antennas. Try to place the Wireless Router in a position 
that can best cover your wireless network. Normally, the higher you place the 
antenna, the better the performance will be. The antenna’s position enhances the 
receiving 
sensitivity.

 

Summary of Contents for A02-RB-W54























































































Reviews:

No comments